Home Sweet Home: Best Abode The Shelves - Built-Ins Business Office 4

Here are the links for previous posts virtually this projection BEST HOME The Shelves - Built-Ins Part 4

Well, I'm back!

Here are the links for previous posts virtually this projection - Built-ins inward the dining room:

Part 1 : The Starting Point
Part 2: The Base Cabinets
Part 3: The Decorative Toekick

For these shelves I used a sail of plywood for the sides in addition to asked the guys there, at Home Depot to cutting the 4 pieces- lengthwise.
At abode I made certain they were even in addition to then size. Their width's virtually 11½". Same affair for the shelves.
*This post contains affiliate links*

Next, I marked all the boards: front-back-top-bottom, in addition to drew the lines for the shelves on both sides of each plank.

Once again, the Right Angle Clamp (Aff.) was my correct manus to run on those boards steady in addition to at the correct angle. The lines on the within helped on keeping the shelf inward place, piece the ones on the exterior were the guides to drive the screws.
This is my get-go fourth dimension driving the screws from the exterior of the shelf leaving the screws exposed. My previous shelves were done amongst bag holes. Both ways are variety of fine. Maybe the bag holes accept a flake to a greater extent than time, simply it all depends on what yous want. Here, the screws exhibit on the exterior in addition to I'm fine amongst it because the sides are going to last covered amongst ¼" beadboard panels.

I run out of ¾" plywood, I used ½" for that overstep part, in addition to added pieces of 1 x 2's to ameliorate secure it.After making certain it's square, it's fourth dimension to attach the back.

built-ins inward my son's room HERE.

They were attached to the shelves amongst gum in addition to brad nails.

The solely affair unlike amongst the human face upwardly frames this fourth dimension was that they had to extend ¼" to a greater extent than for the beadboard to sit down level amongst them, equally yous run across hither inward the bases.

I aligned the within of the overstep shelf amongst the within of the human face upwardly frame. The extra lip hither was grater than on the base: ¾". I added ½" combat pieces to brand them flush.

Every little piece is ane footstep further.

I equally good gave the room a coat of white pigment in addition to built the bench, simply I'm leaving all those details for side past times side post. This past times weekend I didn't produce much...

Check the next links for consummate details virtually this project:

First Part: The starting point

Second part: The Base Cabinets

Third part: The decorative Toe-Kick

Fourth part: The Shelves - you're here.

Fifth part: The Bench

Build-ins Final Reveal

On other notes, Christmas crashed this project! hold off at this! :D

In keeping it existent in addition to equally a proficient procrastinator, this was the scene hither inward the dining room this past times Saturday. It was the closest in addition to emptiest room when coming upwardly from the basement carrying the tree, in addition to the chair, in addition to all the Christmas goodies. I solely had to movement the dust to the other side in addition to take the pics. ;)

I already moved it all to the other side of the living room, in addition to I can't hold off to complete this projection to start decorating for Christmas... For real!

For to a greater extent than Home DIY ideas cheque these out:

This is how it looked: DIY - Stocking Holder